Cabletron Systems 7C04-R Manual Do Utilizador

Managing the Hub

2-27

Using the 7C0x SmartSwitch Hub View

menu allows you to search for a specified MAC address on multiple devices 
simultaneously; however, if you launch this tool from the Hub View or from the 
command line, only the hub against which you launch the tool will be searched.

To launch the Global Find MAC Address tool from the Hub View:

1.

Click on 

 to display the Device menu; note that this menu is the 

same regardless of the Application Display mode currently in effect.

2.

Drag down to Find MAC Address, and release.

The Global Find MAC Address tool is described in detail in Chapter 12 of the 
SPMA Tools Guide

.

If either of the COM Ports on the 7X00 controller module has been configured for 
UPS operation (see Configuring COM Ports, 

include a selection that allows you to launch the UPS configuration tool.

To do so:

1.

Click either mouse button in the Port Status or Port Index box for the COM 
port you wish to configure; the COM port menu will be displayed. (Remember, 
the COM port menus are available in all Application Display modes.)

2.

Drag down to UPS, and release.

If the COM port menu does not include the UPS selection, that COM port has not 
yet been configured for UPS operation; see Configuring COM Ports, 

, 

for more information. 

The UPS configuration tool is described in detail in Chapter 8 of the SPMA Tools 
Guide

.

If you have any FDDI modules installed in your 7C0x SmartSwitch chassis, the 
Module —> FDDI Utilities

 menu provides access to five applications that allow 

you to monitor and manage your FDDI interfaces.

To access FDDI management applications:

1.

Click either mouse button on the Module Index or Module Type box in the Hub 
View to display the Module menu. (Remember, the Module menu is available 
in all Application Display modes.)

2.

Drag down to FDDI Utilities, then across to select the FDDI management tool 
you need:

a.

Port Configuration 

b.

Alarm Configuration