Cabletron Systems 7C04-R Manual Do Utilizador

Using the 7C0x SmartSwitch Hub View

2-28

Managing the Hub

c.

SMT/MAC Configuration 

d.

SMT Connection Policy 

e.

Station List 

All of these applications are described in detail in Chapter 4, FDDI Management.

For 7C0x SmartSwitches which have a 7A06-01 NIM installed, the Module menu 
will provide access to the ATM configuration application.

To launch this application:

1.

Click either mouse button on the Module Index or Module Type box in the Hub 
View to display the Module menu. (Remember, the Module menu is available 
in all Application Display modes.)

2.

Drag down to ATM, and release.

The ATM Configuration application is described in detail in Chapter 5, ATM 
Configuration

.

For 7C0x SmartSwitches which are configured to operate as traditional bridges, 
you can use the Bridge menu to launch the Bridge View application. To do so:

1.

If necessary, put the Hub View into the Bridge Application Display mode (click 
either mouse button on the Module Index or Module Type box to display the 
Module menu, drag down to Application Display, then across to select 
Bridge).

2.

Click either mouse button on the Display Mode box in the Hub View to launch 
the Bridge menu; drag down to Bridge Mgmt, and release. 

The Bridge View application is described in detail in Chapter 6, Using the 7C0x 
SmartSwitch Bridge View

.

To set the polling intervals used by SPMA and the 7C0x SmartSwitch:

1.

Click on 

 to display the Device menu.

2.

Drag down to Polling Intervals, and release.