Cabletron Systems 2H28-08R Manual Do Utilizador

Chapter 5: Local Management

Current Switch Utilization (Read-only)

Shows how much (percentage of processor capacity) of the 2H28-08R is 
currently being used.

Peak Switch Utilization (Read-only)

Shows the peak percentage of maximum switching capacity, since last 
reset.

Reset Peak Switch Utilization (Toggle)

Allows the user to reset the Peak Switch Utilization field. Setting the 
switch to YES resets the Peak Switch Utilization field. 

To reset the Peak Switch Utilization field, proceed as follows:

Use the arrow keys to highlight the Reset Peak Switch Utilization 
field.

Press the SPACE bar to toggle the selection to YES.

Use the arrows keys to highlight the SAVE command at the bottom of 
the screen.

Press ENTER. The message “SAVED OK” displays.

The Flash Download screen, shown in 

, allows the user to 

upgrade the device with a different firmware image.

Before downloading an image to the device, copy the image to the 
network TFTP server.

The user may also force the download of an image by changing 
the position of Switch 6 located inside the device. Refer to 

, for details.

For information about how to set up a workstation as a TFTP 
server, refer to the specific workstation documentation.