Cabletron Systems 2H28-08R Manual Do Utilizador

Chapter 5: Local Management

BootP. 

 describes how to download using TFTP. 

 describes how to download using Runtime.

Reboot After Download (Modifiable only when user chooses 

RUNTIME

)

This field notifies the user that the 2H28-08R will reboot after completing 
the download. If a Runtime Download is performed, this field toggles 
between YES and NO. If YES is selected, the device reboots after the 
download is completed. If NO is selected, the device continues using the 
existing firmware image and stores the new firmware image in FLASH 
memory. When the device is reset or during the next power-up, the device 
boots from FLASH memory using the new image.

TFTP Gateway IP Addr (Modifiable)

This field shows the IP address of the TFTP gateway server defined on the 
General Configuration screen in 

.

Last Image Server IP (Read-only)

This field shows the IP address of the server used for the previous FLASH 
Download.

Last Image File Name (Read-only)

This field shows the complete path and file name of the last image 
downloaded to FLASH.

If TFTP or RUNTIME is selected as the download method 
(

), the following two additional fields display:

Download Server IP (Modifiable)

The IP address of the TFTP server to be used for the FLASH download is 
entered in this field.

Download File Name (Modifiable)

The complete TFTP server path and file name of the new image is entered 
in this field.

To download a firmware image to the 2H28-08R using TFTP, proceed as 
follows:

Use the arrow keys to highlight the Download Method field.