Juniper Networks EX8208 Manual Do Utilizador
This topic describes:
Packing an EX8200 Switch
If you need to transport the switch to another location or return the switch to Juniper
Networks, you need to pack the switch securely in its original packaging to prevent damage
during transportation.
Networks, you need to pack the switch securely in its original packaging to prevent damage
during transportation.
Before you pack the switch:
1.
Power off the switch. See “Powering Off an EX8200 Switch” on page 199.
2.
Remove all wires, plugs, and power cords from the switch.
3.
Remove all line cards and pack them in their original shipping containers. See “Packing
a Line Card Used in an EX8200 Switch” on page 259.
a Line Card Used in an EX8200 Switch” on page 259.
4.
Install cover panels over blank slots.
Leave components that came installed in the chassis in the chassis.
NOTE: Any line cards ordered with the switch are shipped separately. Do not pack any
line cards with the switch.
line cards with the switch.
Ensure that you have the following parts and tools available to pack the switch:
•
A 7/16-in. or 11-mm open-end or socket wrench to install the bracket bolts on the chassis
and shipping pallet
and shipping pallet
•
The original switch packing material (wooden pallet, cardboard box, accessory box
and its contents, foam padding, and brackets and bracket bolts for attaching the
chassis to the pallet)
and its contents, foam padding, and brackets and bracket bolts for attaching the
chassis to the pallet)
•
Electrostatic discharge (ESD) grounding strap
The EX8200 switch is shipped in a cardboard box that has a two-layer wooden pallet
base with foam cushioning between the layers. The switch chassis is bolted to the pallet
base with 4 pallet fasteners, 2 on each side of the chassis.
base with foam cushioning between the layers. The switch chassis is bolted to the pallet
base with 4 pallet fasteners, 2 on each side of the chassis.
CAUTION: The switch is maximally protected inside the shipping box. Pack the switch
only in its original shipping box, securely bolted to the original wooden shipping pallet.
only in its original shipping box, securely bolted to the original wooden shipping pallet.
Do not pack the switch in anything except its original container or the switch might be
damaged in transit.
damaged in transit.
255
Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Returning the Switch or Switch Components