Nortel Networks 5530 Manual Do Utilizador

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide

v2.0

NN48500-559

___________________________________________________________________________________________________________________________

External Distribution

Example:

The following example creates a meter with a CIR of 10 Mbps, burst rate of 20 Mbps for 13 msec
with an in profile action of Silver Service and an out profile action of drop traffic.

•

ERS5500-48T(config)#qos meter 1 name meter_one committed-rate 10000 max-

burst-rate 20000 max-burst-duration 13 in-profile-action 4 out-profile-action 1

11.4 Add a New Policy

a) To assign a Classifier to a new Policy without a meter, enter the following command:

•

ERS5500-48T(config)#qos policy <1-64000> name <name> if-group <if-group name>

clfr-type <block|classifier> clfr-id <1-64000> in-profile-action <1-64000> non-match-
action <1-64000> precedence <3-10**> track-statistics <individual/aggregate>

NOTE: Instead of ‘clfr-id’ you can also enter the classifier or classifier-block name by using ‘clfr-
name’.

b) To assign a Classifier to a new Policy with a meter, enter the following command:

•

ERS5500-48T(config)#

qos policy <1-64000> name <name> if-group <if-group

name> clfr-type <block|classifier> classifier clfr-id <1-64000> meter <1-64000>
non-match-action <1-64000> precedence <3-10**> track-statistics
<individual/aggregate>

Example:

The following adds classifier block 1 to policy 1 with an in profile action of drop if matched and out
profile action of Standard Service if not matched.

•

ERS5500-48T(config)#qos policy 1 name policy_one if-group role_one clfr-type

block clfr-id 1 in-profile-action 1 non-match-action 2 precedence 10

To add track individual statistics for each classifier, use the following command:

•

ERS5500-48T(config)#qos policy 1 name policy_one if-group role_one clfr-type

block clfr-id 1 in-profile-action 1 non-match-action 2 precedence 10 track-statistics
individual