DELL 9.8(0.0) Manual Do Utilizador
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
Commands
•
—Allows you to configure the RA guard related
commands.
•
enter the RA guard policy configuration mode.
ipv6 nd ra-guard attach-policy
Apply the IPv6 RA guard to a specific interface.
Syntax
ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan
2, vlan 3.....]]
2, vlan 3.....]]
Parameters
policy policy-
name
name
Enter the keyword policy then the policy name. The
policy-name allows a maximum of 140 characters.
vlan [vlan 1,
vlan 2, vlan
3........]
Enter the keyword vlan then the VLAN range. The VLAN
range is from 1 to 4094.
Defaults
none
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Z9000 switches.
Related
Commands
guard policies or a specific RA guard policy.
ipv6 nd ra-guard enable
Allow you to configure the RA guard related commands.
Syntax
ipv6 nd ra-guard enable
To disable the RA guard, use the no ipv6 nd ra-guard enable command.
To disable the RA guard, use the no ipv6 nd ra-guard enable command.
Neighbor Discovery Protocol (NDP)
1229