Nortel Networks 10BASE-T Manual Do Utilizador

Using the Console Interface

309985-C Rev 00

3-121

 

This section describes the various functions of the Event Log screen 
(

).

When the switch is part of a stack configuration, the Event Log screen displays 
only the data for the specific unit you are connected to through the Console/
Comm port. However, if you are connected to a stack unit through a TELNET 
session, the Event Log screen displays the data for the base unit of that stack 
configuration.

Choose Display Event Log (or press e) from the main menu to open the Event Log 
screen.

This screen does not refresh dynamically to show new entries. To 

refresh the screen, press [Ctrl]-P.

                                   Event Log

Entry Number:  4          sysUpTime:  00:14:36       Reset Count:  2

Connection logout, IP address: 38.227.40.8, access mode: no security.

Entry Number:  3          sysUpTime:  00:13:35       Reset Count:  2

Connection logout, IP address: 38.227.40.8, access mode: no security.

Entry Number:  2          sysUpTime:  00:00:53       Reset Count:  2

Successful connection from IP address: 38.227.40.8, access mode: no security.

Entry Number:  1          sysUpTime:  00:00:00       Reset Count:  1

Software downloaded to BayStack Model 410-24T HW:Revx FW:Vx.xx SW:Vx.x.x.x

Press Ctrl-P to see previous display. Press Ctrl-N to see more entries.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.