Nortel Networks 10BASE-T Manual Do Utilizador
Using the Console Interface
309985-C Rev 00
3-123
Write Threshold
To extend the lifetime of the event log’s flash memory, a write threshold is set for
each event entered in flash memory. The write threshold is 20 entries for each
event. If any event exceeds the write threshold, an event entry is displayed in the
Event Log screen.
each event entered in flash memory. The write threshold is 20 entries for each
event. If any event exceeds the write threshold, an event entry is displayed in the
Event Log screen.
Figure 3-51.
Sample Event Log Entry Exceeding the Write Threshold
The write threshold is reset when either of the following occurs:
•
The BayStack 410-24T switch is reset.
•
The firmware determines that compression is required for maintenance of the
event log’s flash memory.
event log’s flash memory.
Flash Update
Figure 3-52.
Sample Event Log Entry Showing Flash Update Status
Entry Number: 3 sysUpTime: 02:29:44 Reset Count: 2
The last event exceeded the write threshold. Further write attempts
by this event are blocked. The write threshold will be cleared when
the switch is reset or when the Event Log is compressed.
Entry Number: 13 sysUpTime: 12:20:38 Reset Count: 2
Flash configuration update operation (write or erase) failed.
Configuration information may be lost.