Nortel Networks 10BASE-T Manual Do Utilizador
Using the BayStack 410-24T 10BASE-T Switch
3-124
309985-C Rev 00
Save Current Settings
The Save Current Settings option (accessed from the main menu) allows you to
save your current configuration settings without resetting your switch or stack.
This option is followed by a screen prompt that precedes the action. Enter Yes to
save your configuration settings; enter No to abort the option. If your switch is
participating in a stack configuration, additional prompts allow you to save your
configuration settings for a specific unit in the stack or for the entire stack.
save your current configuration settings without resetting your switch or stack.
This option is followed by a screen prompt that precedes the action. Enter Yes to
save your configuration settings; enter No to abort the option. If your switch is
participating in a stack configuration, additional prompts allow you to save your
configuration settings for a specific unit in the stack or for the entire stack.
Reset
The Reset option (accessed from the main menu) allows you to reset a standalone
switch, a specific unit in a stack configuration, or an entire stack without erasing
any configured switch parameters. Resetting the switch takes approximately 5
seconds. During this time, the switch initiates a self-test that comprises various
diagnostic routines and subtests. The LEDs display various patterns to indicate
that the subtests are in progress. The results of the self-test are displayed briefly
(5 or 10 seconds) in the Self-Test screen (
switch, a specific unit in a stack configuration, or an entire stack without erasing
any configured switch parameters. Resetting the switch takes approximately 5
seconds. During this time, the switch initiates a self-test that comprises various
diagnostic routines and subtests. The LEDs display various patterns to indicate
that the subtests are in progress. The results of the self-test are displayed briefly
(5 or 10 seconds) in the Self-Test screen (
), which is followed by the
Nortel Networks logo screen (
).
Note:
The Self-Test screen remains displayed only if the self-test detects a
fatal error.