Nortel Networks 10BASE-T Manual Do Utilizador
Using the BayStack 410-24T 10BASE-T Switch
B-2
309985-C Rev 00
10BASE-T/100BASE-TX MDA
The 400-4TX MDA (
) uses four 10BASE-T/100BASE-TX RJ-45
describes
the 400-4TX MDA components and LEDs.
Figure B-1.
400-4TX MDA Front Panel
Table B-1.
400-4TX MDA Components
Item
Label
Description
1
100
100BASE-TX port status LEDs (green):
On: The corresponding port is set to operate at 100 Mb/s.
Off: The link connection is bad or there is no connection to this port.
Blinking: The corresponding port is management disabled.
2
10
10BASE-T port status LEDs (green):
On: The corresponding port is set to operate at 10 Mb/s.
Off: The link connection is bad or there is no connection to this port.
Blinking: The corresponding port is management disabled.
3
F Dx
Full-duplex port status LEDs (green):
On: The corresponding port is in full-duplex mode.
Off: The corresponding port is in half-duplex mode.
4
Activity
Port activity LEDs (green):
Blinking: Indicates the network activity level for the corresponding port. A
high level of network activity can cause LEDs to appear to be on
continuously.
high level of network activity can cause LEDs to appear to be on
continuously.
5
10BASE-T/100BASE-TX RJ-45 (8-pin modular) port connectors.
400-4TX MDA
Activity
100
10
F Dx
1
4
BS41046A
5
3
2