Nortel Networks 10BASE-T Manual Do Utilizador

Página de 330
Media Dependent Adapters
309985-C Rev 00
B-3
 
The RJ-45 ports are configured as media-dependent interface-crossover (MDI-X) 
connectors. These ports connect over straight cables to the network interface 
controller (NIC) card in a node or server, similar to a conventional Ethernet 
repeater hub. If you are connecting to another Ethernet hub or Ethernet switch, 
you need a crossover cable unless an MDI connection exists on the associated port 
of the attached device.
The 400-4TX MDA can operate at either 10 Mb/s or 100 Mb/s. The speed is 
determined through autonegotiation with its connecting device.
For installation instructions, see 
” on 
100BASE-FX MDAs
Warning: 
Fiber optic equipment can emit laser or infrared light that can 
injure your eyes. Never look into an optical fiber or connector port. Always 
assume that fiber optic cables are connected to a light source.
Vorsicht:
 Glasfaserkomponenten können Laserlicht bzw. Infrarotlicht 
abstrahlen, wodurch Ihre Augen geschädigt werden können. Schauen Sie 
niemals in einen Glasfaser-LWL oder ein Anschlußteil. Gehen Sie stets 
davon aus, daß das Glasfaserkabel an eine Lichtquelle angeschlossen ist.
Avertissement:
 L’équipement à fibre optique peut émettre des rayons 
laser ou infrarouges qui risquent d’entraîner des lésions oculaires.  Ne 
jamais regarder dans le port d’un connecteur ou d’un câble à fibre optique.  
Toujours supposer que les câbles à fibre optique sont raccordés à une 
source lumineuse.
Advertencia:
 Los equipos de fibra óptica pueden emitir radiaciones de 
láser o infrarrojas que pueden dañar los ojos. No mire nunca en el interior 
de una fibra óptica ni de un puerto de conexión. Suponga siempre que los 
cables de fibra óptica están conectados a una fuente luminosa.