Netgear NETGEAR Manual Do Utilizador

Switching Commands

8-41

<slot/port>

This command removes the monitor session (port monitoring) designation from both the source 
probe port and the destination monitored port and removes the probe port from all VLANs. The 
port must be manually re-added to any desired VLANs.

This command configures the monitor session (port monitoring) mode to enable. The probe and 
monitored ports must be configured before monitor session (port monitoring) can be enabled. If 
enabled, the probe port will monitor all traffic received and transmitted on the physical monitored 
port. It is not necessary to disable port monitoring before modifying the probe and monitored 
ports.

disabled

This command sets the monitor session (port monitoring) mode to disable. 

This command disables a port.

enabled