Netgear NETGEAR Manual Do Utilizador

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Switching Commands

8-43

202-10088-01, March 2005

Format

speed all {<100 | 10> <half-duplex | full-duplex>}

Mode

Global Config

Acceptable values are:

100h

100BASE-T half-duplex

100f

100BASE-T full duplex

10h

10BASE-T half duplex

10f

10BASE-T full duplex

storm-control broadcast

This command enables broadcast storm recovery mode. If the mode is enabled, broadcast storm
recovery with high and low thresholds is implemented.

The threshold implementation follows a percentage pattern. If the broadcast traffic on any Ethernet
port exceeds the high threshold percentage (as represented in

Table 1

) of the link speed, the switch

discards the broadcasts traffic until the broadcast traffic returns to the low threshold percentage or
less. The full implementation is depicted in the

Table 1

Format

storm-control broadcast

Mode

Global Config

no storm-control broadcast

This command disables broadcast storm recovery mode.

The threshold implementation follows a percentage pattern. If the broadcast traffic on any Ethernet
port exceeds the high threshold percentage (as represented in

Table 2

) of the link speed, the switch

discards the broadcasts traffic until the broadcast traffic returns to the low threshold percentage or
less. The full implementation is depicted in the

Table 2

Table 1. Broadcast Storm Recovery Thresholds

Link Speed

High

Low

10M

100M

1000M