Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-83
202-10088-01, March 2005
default-router
This command specifies the default router list for a DHCP client. {
address1, address2… address8
}
are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
0.0.0.0 is invalid.
Default
None
Format
default-router <address1> [<address2>....<address8>]
Mode
DHCP Pool Config
no default-router
This command removes the default router list.
Format
no default-router
Mode
DHCP Pool Config
dns-server
This command specifies the IP servers available to a DHCP client. Address parameters are valid IP
addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
none
Format
dns-server <address1> [<address2>....<address8>]
Mode
DHCP Pool Config
no dns-server
This command removes the DNS Server list.
Format
no dns-server
Mode
DHCP Pool Config
hardware-address
This command specifies the hardware address of a DHCP client.
Hardware-address is the MAC address of the hardware platform of the client consisting of 6 bytes
in dotted hexadecimal format.
in dotted hexadecimal format.