Netgear NETGEAR Manual Do Utilizador

Security Commands

9-21

The configured IP address of the authentication server

Max number of retransmits  The configured value of the maximum number of times a 

request packet is retransmitted

The configured timeout value, in seconds, for request re-trans-
missions

Yes or No

If the optional token 'servers' is included, the following information regarding the configured 
RADIUS servers is displayed.

IP Address of the configured RADIUS server

The port in use by this server

Primary or secondary

Yes / No

Enables or disables. the message authenticator attribute for the 
selected server

This command is used to display the statistics for RADIUS or configured server . To show the 
configured RADIUS server statistic, the IP Address specified must match that of a previously 
configured RADIUS server. On execution, the following fields are displayed.

If ip address is not specified than only Invalid Server Address field is displayed. Otherwise 
other listed fields are displayed.  

The number of RADIUS Access-Response packets received from 

unknown addresses.  

IP Address of the Server.

The time interval, in hundredths of a second, between the most recent Access-
Reply | Access-Challenge and the Access-Request that matched it from the 
RADIUS authentication server.

The number of RADIUS Access-Request packets sent to this 
server. This number does not include retransmissions.