Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Security Commands
9-23
202-10088-01, March 2005
Mode
Privileged EXEC
no ip ssh
This command is used to disable SSH.
Format
no ip ssh
Mode
Privileged EXEC
ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1),
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default
1 and 2
Format
ip ssh protocol [1] [2]
Mode
Privileged EXEC
show ip ssh
This command displays the ssh settings.
Format
show ip ssh
Mode
Privileged EXEC
Administrative Mode
This field indicates whether the administrative mode of SSH is
enabled or disabled.
enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or
both versions 1 and version 2.
both versions 1 and version 2.
Connections This field specifies the current ssh connections.
Hypertext Transfer Protocol (HTTP) Commands
This section provides a detailed explanation of the HTTP commands. The commands are divided
into the following groups:
into the following groups:
•
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
configuration command there is a show command that will display the configuration setting.
•
Show commands are used to display switch settings, statistics and other information.