Netgear NETGEAR Manual Do Utilizador

Routing Commands

10-1

This chapter provides a detailed explanation of the Routing commands. 

This chapter provides a detailed explanation of the ARP commands. The commands are divided by 
functionality into the following different groups:

•

Show commands are used to display switch settings, statistics and other information. 

•

Configuration Commands are used to configure features and options of the switch. For every 
configuration command there is a show command that will display the configuration setting.

•

Copy commands are used to transfer configuration and informational files to and from the 
switch. 

This command creates an ARP entry. The value for <ipaddress> is the IP address of a device on a 
subnet attached to an existing routing interface. <macaddr> is a unicast MAC address for that 
device. 

The format is 6 two-digit hexadecimal numbers that are separated by colons, for example 
00:06:29:32:81:40. 

 

This command deletes an ARP entry. The value for <arpentry> is the IP address of the interface. 
The value for <ipaddress> is the IP address of a device on a subnet attached to an existing routing 
interface. <macaddr> is a unicast MAC address for that device.