Netgear NETGEAR Manual Do Utilizador

10-2

Routing Commands

This command enables proxy ARP on a router interface. 

Without proxy ARP, a device only responds to an ARP request if the target IP address is an address 
configured on the interface where the ARP request arrived. With proxy ARP, the device may also 
respond if the target IP address is reachable. The device only responds if all next hops in its route 
to the destination are through interfaces other than the interface that received the ARP request.

enabled

This command disables proxy ARP on a router interface. 

This command configures the ARP cache size. The value for <cachesize> is a platform specific 
integer value.

This command configures the default ARP cache size.