Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands
10-29
202-10088-01, March 2005
Auto Summary Mode
Select enable or disable from the pulldown menu. If you select
enable groups of adjacent routes will be summarized into single
entries, in order to reduce the total number of entries The default
is enable.
enable groups of adjacent routes will be summarized into single
entries, in order to reduce the total number of entries The default
is enable.
Host Routes Accept Mode
Select enable or disable from the pulldown menu. If you select
enable the router will be accept host routes. The default is enable.
enable the router will be accept host routes. The default is enable.
Global Route Changes
The number of route changes made to the IP Route Database by
RIP. This does not include the refresh of a route's age.
RIP. This does not include the refresh of a route's age.
Global queries -
The number of responses sent to RIP queries from other sys-
tems.Default Metric
tems.Default Metric
Sets a default for the metric of redistributed routes.This field dis-
plays the default metric if one has already been set or blank if not
configured earlier. The valid values are (1 to 15)
plays the default metric if one has already been set or blank if not
configured earlier. The valid values are (1 to 15)
Default Metric
Sets a default for the metric of redistributed routes.This field dis-
plays the default metric if one has already been set or blank if not
configured earlier. The valid values are (1 to 15)
plays the default metric if one has already been set or blank if not
configured earlier. The valid values are (1 to 15)
Default Route Advertise
The default route.
show ip rip interface brief
This command displays general information for each RIP interface. For this command to display
successful results routing must be enabled per interface (i.e. ip rip).
successful results routing must be enabled per interface (i.e. ip rip).
Format
show ip rip interface brief
Mode
Privileged EXEC and User EXEC
Slot/Port
Valid slot and port number separated by forward slashes.
IP Address
The IP source address used by the specified RIP interface.
Send Version
The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2.
interface. The types are none, RIP-1, RIP-1c, RIP-2.
Receive Version
The RIP version(s) allowed when receiving updates from the
specified interface. The types are none, RIP-1, RIP-2, Both
specified interface. The types are none, RIP-1, RIP-2, Both
RIP Mode
RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it.
vates, disable de-activates it.
Link State
The mode of the interface (up or down).