Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. NETGEAR
  5. Manual Do Utilizador

Netgear NETGEAR Manual Do Utilizador

Download
Página de 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software 
10-30
Routing Commands
202-10088-01, March 2005
show ip rip interface 
This command displays information related to a particular RIP interface.
Format  
show ip rip interface <slot/port>
Mode  
Privileged EXEC and User EXEC
Interface  
Valid slot and port number separated by forward slashes. This is a 
configured value.
IP Address  
The IP source address used by the specified RIP interface. This is 
a configured value.
Send version  
The RIP version(s) used when sending updates on the specified 
interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a 
configured value.
Receive version  
The RIP version(s) allowed when receiving updates from the 
specified interface. The types are none, RIP-1, RIP-2, Both. This 
is a configured value.
Both RIP Admin Mode   RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it. This is a configured value.
Link State  
Indicates whether the RIP interface is up or down. This is a con-
figured value.
Authentication Type  
The RIP Authentication Type for the specified interface. The 
types are none, simple, and encrypt. This is a configured value.
Default Metric  
A number which represents the metric used for default routes in 
RIP updates originated on the specified interface. This is a con-
figured value.
The following information will be invalid if the link state is down.
Bad Packets Received   The number of RIP response packets received by the RIP process 
which were subsequently discarded for any reason.
Bad Routes Received    The number of routes contained in valid RIP packets that were 
ignored for any reason.
Updates Sent  
The number of triggered RIP updates actually sent on this inter-
face.