Netgear NETGEAR Manual Do Utilizador

8-20

Switching Commands

•

Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered 
(b'0') or locally administered (b'1'). 

•

Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual 
address (b'0') or a group address (b'1'). 

•

The second character, of the twelve character macaddr, must be 2, 6, A or E.

A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').

This command specifies whether the burned in MAC address or the locally-administered MAC 
address is used. 

burnedin

This command resets the value of MAC address to its default. 

This command sets the IP Address, subnet mask and gateway of the router. The IP Address and the 
gateway must be on the same subnet.

network parms <ipaddr> <netmask> [<gateway>]