Netgear NETGEAR Manual Do Utilizador
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-22
Switching Commands
202-10088-01, March 2005
no telnetcon timeout
This command sets the telnet connection session timeout value, in minutes, to the default.
Note:
Changing the timeout value for active sessions does not become effective until the session is
reaccessed. Any keystroke will also activate the new timeout duration.
Format
no telnetcon timeout
Mode
Privileged EXEC
serial baudrate
This command specifies the communication rate of the terminal interface. The supported rates are
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default
9600
Format
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200}
Mode
Line Config
no serial baudrate
This command sets the communication rate of the terminal interface.
Format
no serial baudrate
Mode
Line Config
serial timeout
This command specifies the maximum connect time (in minutes) without console activity. A value
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default
5
Format
serial timeout <0-160>
Mode
Line Config
no serial timeout
This command sets the maximum connect time (in minutes) without console activity.
Format
no serial timeout