Netgear NETGEAR Manual Do Utilizador

Switching Commands

8-29

May be enabled or disabled. The factory default is enabled. Indi-
cates whether a trap will be sent when the same user ID is logged 
into the switch more than once at the same time (either via telnet 
or serial port). 

May be enabled or disabled. The factory default is enabled. Indi-
cates whether spanning tree traps will be sent. 

Broadcast Storm Flag   May be enabled or disabled. The factory default is enabled. Indi-

cates whether broadcast storm traps will be sent. 

This command adds (and names) a new SNMP community. A community name is a name 
associated with the switch and with a set of SNMP managers that manage it with a specified 
privileged level. The length of name can be up to 16 case-sensitive characters.

Community names in the SNMP community table must be unique. When making multiple 

entries using the same community name, the first entry is kept and processed and all duplicate 
entries are ignored. 

Two default community names: Public and Private. You can 
replace these default community names with unique identifiers 
for each community. The default values for the remaining four 
community names are blank.

This command removes this community name from the table. The name is the community name to 
be deleted.