3com WX1200 Manual Do Utilizador
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
set spantree maxage
413
vlan
vlan-id
— VLAN name or number. MSS changes the interval on
only the specified VLAN.
Defaults — The default hello timer interval is 2 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the hello interval for all
VLANs to 4 seconds:
VLANs to 4 seconds:
WX4400# set spantree hello 4 all
success: change accepted.
success: change accepted.
See Also
set spantree
maxage
maxage
Changes the maximum age for an STP root bridge hello packet that is
acceptable to a wireless LAN switch acting as a designated bridge on one
or all of its VLANs. After waiting this period of time for a new hello
packet, the WX switch determines that the root bridge is unavailable and
issues a topology change message.
acceptable to a wireless LAN switch acting as a designated bridge on one
or all of its VLANs. After waiting this period of time for a new hello
packet, the WX switch determines that the root bridge is unavailable and
issues a topology change message.
Syntax —
set spantree maxage aging-time {all | vlan vlan-id}
aging-time
— Maximum age value. You can specify from 6 through
40 seconds.
all
— Changes the maximum age on all VLANs.
vlan
vlan-id
— VLAN name or number. MSS changes the maximum
age on only the specified VLAN.
Defaults — The default maximum age for root bridge hello packets is 20
seconds.
seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.