3com WX1200 Manual Do Utilizador
set spantree portfast
415
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — This command applies only to the default VLAN (VLAN 1). To
change the cost of a port in another VLAN, use the set spantree
portvlancost command.
change the cost of a port in another VLAN, use the set spantree
portvlancost command.
Examples — The following command changes the cost on ports 3 and 4
to 20:
to 20:
WX1200# set spantree portcost 3,4 cost 20
success: change accepted.
success: change accepted.
See Also
set spantree
portfast
portfast
Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
wireless LAN switch.
Syntax —
set
spantree
portfast
port
port-list
{enable
|
disable}
port
port-list
— List of ports. MSS enables the feature on the
specified ports.
enable
— Enables port fast convergence.
disable
— Disables port fast convergence.
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.
to servers, hosts, or other MAC stations.