Omega Vehicle Security CN3271 Series Manual Do Utilizador

P 4

P 4 =

Alarm Standby (mask) Function

(Skipped if option is not available or P1= none)
OFF =

Standby function disabled

On =

Standby function enabled

If the alarm is programmed as band or deviation,
this function masks the alarm condition at start up
and after a “Su” (limit threshold) changement until
the process variable reaches the alarm threshold,
plus or minus hysteresis. This standby function
masks a Process Alarm condition at start up until
the process variable reaches the alarm threshold
plus or minus hysteresis.

PF =

Time Constant of the Filter

applied to the Measured Value for

applied to the Measured Value for
Alarm Action

Alarm Action

(Skipped if option is not available or P1 = none)
Range: From 0 (filter OFF) to 8 seconds
(First order filter with selected time constant.)

n 1 = Safety Lock

n 1 = Safety Lock
0

UNLOCKed. The device is always
UNLOCKed and all parameters can be
modified.

LOCKed. The device is always LOCKed
and no parameters can be modified

From 2 to 9999 = This number is a password, to be

used in run time (see “nn”), to LOCK/
UNLOCK the device.

t1 = Timeout Selection

t1 = Timeout Selection
tn10 =

10 second timeout

tn30 =

30 second timeout

d1 = Digital Input (contact closure)

d1 = Digital Input (contact closure)
(This is a read only parameter)
Enb =

Digital input enabled

dlS =

Digital input disabled

(The digital input is used as a remote
Acknowledgment .)

The configuration procedure is now completed.
The display will show "COnF".

LHL-1-NEUTRO.pmd

19/04/2004, 15.07