Avaya C460 Manual Do Utilizador

Chapter 2        Avaya C460 CLI Commands

Avaya C460 Reference Guide

75

User level: read-write, admin.
Use the rmon alarm command to create a new RMON alarm entry.

The syntax for this command is:

 <Alarm Number> <variable> <interval> <sampletype> 

 <rising threshold> <rising event> falling-

 <falling threshold> <falling event> <startup alarm> 

<owner>

Example:

alarm number

This is the alarm index number of this entry (it is advisable to 
use the same interface number as your alarm index number.)

variable

This is the MIB variable which will be sampled by the alarm 
entry.

interval

The interval between 2 samples.

sample type

This can be set to either delta (the difference between 2 
samples) or an absolute value.

rising threshold

This sets the upper threshold for the alarm entry.

rising event

The RMON event entry that will be notified if the upper 
threshold is passed.

falling 
threshold

This sets the lower threshold for the alarm entry.

falling event

The RMON event entry that will be notified if the lower 
threshold is passed.

startup alarm

The instances in which the alarm will be activated. The 
possible parameters are: Rising, Falling, risingOrfalling.

owner

Owner name string.

C460-1# rmon alarm 1026 1.3.6.1.2.1.16.1.1.1.5.1026 60 

alarm 1026 was created successfully