Avaya M770 Manual Do Utilizador
Chapter 10
Managing PNNI Routing
Avaya M770 ATM Switch User’s Guide
135
The output of this command shows the neighbors to this node and their state.
Field
Description
Peer Node Id
The 22-bytes node ID of the peered neighbor.
Nbr State
Indicates the state in the Neighboring Peer state machine for this
neighbor. The state ‘full’ indicates that the two nodes completed
database synchronization.
Active Time
The amount of seconds since the databases became
synchronized, and this link is advertised.
SvcHello
State
This field is applicable for logical neighboring relationship.
Between LGNs all PNNI control protocols run over SVC-based
RCC. This field indicates the state of the SVC-based RCC Hello
RCC. This field indicates the state of the SVC-based RCC Hello
protocol.The state of 'twoWay' indicates that the remote node
was discovered correctly.
Total
number of
ports
The number of parallel links that go to the same neighbor node.
Number of
received DBS
packets
The number of Database Summary packets that were received
from the neighboring peer (part of the PNNI database
synchronization phase).
Number of
transmitted
DBS packets
The number of Database Summary packets that were
transmitted to the neighboring peer (part of the PNNI database
synchronization phase).
Number of
received
PTSPs
The number of PNNI Topology State Packets (PTSP) that were
received from the neighboring peer.
Number of
transmitted
PTSPs
The number of PTSPs that were transmitted to the neighboring
peer.
Number of
received
PTSE
requests
The number of received PNNI Topology State Element (PTSE)
requests (during PNNI Database synchronization phase).