Avaya M770 Manual Do Utilizador

Chapter 10

Managing PNNI Routing

136

Avaya M770 ATM Switch User’s Guide

To show local reachable addresses (RAs), use the following command:

The output of this command displays a list of all local Reachable Addresses. For 

Number of 

transmitted 

PTSE 

requests

The number of transmitted PTSE requests (during PNNI 

Database synchronization phase).

Number of 

received 

PTSE acks

The number of PTSE acknowledgments that were received from 

the neighboring peer.

Number of 

transmitted 

PTSE acks

The number of PTSE acknowledgments that were transmitted to 

the neighboring peer.

Nbr Port

Provides a table* with information about all the ports on the 

physical node that are connected to the same neighbor. The local 

ports may be from any slot on the switch. 

*This table is applicable to physical level neighbors.

Local Port

The identification (slot.port) of the local end of the link to the 

neighbor.

Remote Port

The identification of the remote end (slot.port).

Hub Slot

The slot on which the local end of the link resides.

Flood Status

A true/false value indicating which of the parallel links is used 

for flooding of PTSEs. In case there is only one link to a neighbor 

that link will be used for flooding of PTSEs.

Command:

M15-155s8:/>route pnni local ra

Examples: 

Local Ra: Len   = 152 bits

          Prefix = 

39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.5C

          Port                Type           Scope

          -----------------------------------------

          08.00.00.00

Internal       0

Field

Description