Avaya M770 Manual Do Utilizador

Chapter 11

Managing the Management LEC

Avaya M770 ATM Switch User’s Guide

165

You can select the ELAN that the management LEC will attempt to join. By default, 
the management LEC attempts to join the ELAN “default”.
You can:
•

Specify the ELAN that the management LEC will attempt to join.

•

Set up the LECS to dictate which ELAN the management LEC will attempt to 
join.

•

View the current ELAN that the management LEC will attempt to join.

Any changes caused by the following commands will not take effect until the 

M770 ATM Switch management LEC is restarted. To restart the M770 ATM Switch 
management LEC, use the

lane lec restart 

command.

To specify the ELAN that the management LEC will attempt to join, enter the

lane lec elan

command:

To leave the decision about the ELAN that the management LEC joins, to the LECS, 
enter the

lane lec elan

command:

Command:

M15-155s8:/>lane lec elan <name>

Example:

M15-155s8:/>lane lec elan default

Parameters: 

<name>

The name of the new ELAN that the management LEC 
will attempt to join. The ELAN must be somewhere on 
the network and known to the LECS.

Command:

M15-155s8:/>lane lec elan -

Example:

M15-155s8:/>lane lec elan -

Parameters: 

- 

(hyphen)

The decision about which ELAN the management LEC 
will attempt to join is left to the LECS.