Справочник Пользователя для Avaya M770
Chapter 11
Managing the Management LEC
Avaya M770 ATM Switch User’s Guide
165
Managing the ELAN for the management LEC
You can select the ELAN that the management LEC will attempt to join. By default,
the management LEC attempts to join the ELAN “default”.
You can:
•
the management LEC attempts to join the ELAN “default”.
You can:
•
Specify the ELAN that the management LEC will attempt to join.
•
Set up the LECS to dictate which ELAN the management LEC will attempt to
join.
join.
•
View the current ELAN that the management LEC will attempt to join.
Note:
Any changes caused by the following commands will not take effect until the
M770 ATM Switch management LEC is restarted. To restart the M770 ATM Switch
management LEC, use the
management LEC, use the
lane lec restart
command.
To specify the ELAN that the management LEC will attempt to join, enter the
lane lec elan
command:
To leave the decision about the ELAN that the management LEC joins, to the LECS,
enter the
enter the
lane lec elan
command:
Command:
M15-155s8:/>lane lec elan <name>
Example:
M15-155s8:/>lane lec elan default
Parameters:
<name>
The name of the new ELAN that the management LEC
will attempt to join. The ELAN must be somewhere on
the network and known to the LECS.
will attempt to join. The ELAN must be somewhere on
the network and known to the LECS.
Command:
M15-155s8:/>lane lec elan -
Example:
M15-155s8:/>lane lec elan -
Parameters:
-
(hyphen)
The decision about which ELAN the management LEC
will attempt to join is left to the LECS.
will attempt to join is left to the LECS.