Avaya M770 Manual Do Utilizador

Chapter 14

Managing the LECS

192

Avaya M770 ATM Switch User’s Guide

To change the location and type of the local LECS, use the

 

lane lecs location 

local

 

command:

Remote LECS

When creating or changing to a remote LECS:
•

If a local LECS already exists on the switch then you are warned that it will be 
deleted and the switch will look for a LECS at the specified remote address.

To change the location of the remote LECS, use the

 lane lecs remote 

command:

Changing the LECS location may disrupt all LANE connections and any 

change will take effect immediately.

Command:

M15-155s8:/>lane lecs location local {wka | <selector>}[{simple | resilient}]

Parameters
:

wka

simple

An active local simple LECS is created, using the WKA. 
Remote clients that make requests for the WKA will be 
routed to this LECS via PNNI.

<selector>

simple

An active simple LECS is created, using the modules 
address with the specified selector.

wka

resilient

A resilient LECS is created.
This LECS will enter the election process and if elected will 
be the “active LECS”. Remote clients that make requests 
for the WKA will be routed to this LECS via PNNI.

<selector>

resilient

A resilient LECS is created, using the modules address with 
the specified selector.
The created LECS will enter the election process and if 
elected will be the active LECS. Modules that are 
configured to use the elected resilient LECS will direct 
clients to this LECS.

Command:

M15-155s8:/>lane lecs location remote {elected | wka | <address>}

Parameters:

remote

elected

Module will wait for notification via a proprietary protocol, of 
the address of the elected resilient LECS.

wka

Module will seek a remote LECS, that is advertising the WKA.

<address>

Module will seek a remote LECS, that is advertising the 
specific ATM address on the network.