Справочник Пользователя для Avaya M770
Chapter 14
Managing the LECS
192
Avaya M770 ATM Switch User’s Guide
To change the location and type of the local LECS, use the
lane lecs location
local
command:
Remote LECS
When creating or changing to a remote LECS:
•
•
If a local LECS already exists on the switch then you are warned that it will be
deleted and the switch will look for a LECS at the specified remote address.
deleted and the switch will look for a LECS at the specified remote address.
To change the location of the remote LECS, use the
lane lecs remote
command:
Note:
Changing the LECS location may disrupt all LANE connections and any
change will take effect immediately.
Command:
M15-155s8:/>lane lecs location local {wka | <selector>}[{simple | resilient}]
Parameters
:
:
wka
simple
An active local simple LECS is created, using the WKA.
Remote clients that make requests for the WKA will be
routed to this LECS via PNNI.
Remote clients that make requests for the WKA will be
routed to this LECS via PNNI.
<selector>
simple
An active simple LECS is created, using the modules
address with the specified selector.
address with the specified selector.
wka
resilient
A resilient LECS is created.
This LECS will enter the election process and if elected will
be the “active LECS”. Remote clients that make requests
for the WKA will be routed to this LECS via PNNI.
This LECS will enter the election process and if elected will
be the “active LECS”. Remote clients that make requests
for the WKA will be routed to this LECS via PNNI.
<selector>
resilient
A resilient LECS is created, using the modules address with
the specified selector.
The created LECS will enter the election process and if
elected will be the active LECS. Modules that are
configured to use the elected resilient LECS will direct
clients to this LECS.
the specified selector.
The created LECS will enter the election process and if
elected will be the active LECS. Modules that are
configured to use the elected resilient LECS will direct
clients to this LECS.
Command:
M15-155s8:/>lane lecs location remote {elected | wka | <address>}
Parameters:
remote
elected
Module will wait for notification via a proprietary protocol, of
the address of the elected resilient LECS.
the address of the elected resilient LECS.
wka
Module will seek a remote LECS, that is advertising the WKA.
<address>
Module will seek a remote LECS, that is advertising the
specific ATM address on the network.
specific ATM address on the network.