Avaya M770 Manual Do Utilizador

Chapter 16

Managing an ELAN

Avaya M770 ATM Switch User’s Guide

215

To change the operating mode of LESes for a specific ELAN, use the

lane elan 

les

 

command:

You can set a specific automatic registering mode for an ELAN. For more 

information see Changing the Automatic Registration Mode of an ELAN later in 
this chapter.

You can set the automatic registration mode for an ELAN. The automatic registering 
modes are:
•

resilient - the ELAN will adopt the resilient automatic registering mode.

•

distributed - the ELAN will adopt the mode that supports distributed LANE 
Services.

•

autosense - the ELAN will adopt the mode from the first registering LES.

For more information about the above automatic LES address determination 
methods, see Chapter 13, “LANE Services”.
To change the automatic registration mode of an ELAN, use the

lane elan 

autovers

 

command:

The above change does not affect the ELAN until the next time it is activated.

You must change the ELAN automatic registration mode to distributed before 

using any of the commands in this Chapter which alter the way distributed ELANs 
are used.

Command:

M15-155s8:/>lane elan les <name> [auto | <atm-addr>]

Example:

M15-155s8:/>lane elan les elan1 auto

Parameters:

<name>

The name of the ELAN.

auto

Select only if an M770 LES will host the ELAN.

<atm-addr>

Enter the full ATM address of the LES that will host the 
ELAN.

Command:

M15-155s8:/>lane elan autovers <name> <automode>

Example:

M15-155s8:/>lane elan autovers accounts_elan distributed

ELAN autoregistration mode set to distributed

Parameters:

<name>

The name of the ELAN, this must be 32 characters or less.

<automode>

Select one of the following automatic registration modes: resilient, 
distributed, or autosense.
If this last parameter is not entered then the automatic registering 
mode for the specified ELAN will be displayed.