Avaya P330-ML-ML Manual Do Utilizador
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
96
Avaya P330-ML Reference Guide
The syntax for this command is:
set port negotiation
<module>/<port> {enable|disable}
Example:
To disable autonegotiation on port 1, module 4:
To disable autonegotiation on port 1, module 4:
set port point-to-point admin status
User level: privileged, supervisor.
Use the set port point-to-point admin status command to set the port
RSTP point-to-point admin status.
Use the set port point-to-point admin status command to set the port
RSTP point-to-point admin status.
The syntax for this command is:
set port point-to-point admin status <module/port> <admin
status>
Example:
module
Number of the switch. If you do not specify a number, the ports
on all the switches are shown.
on all the switches are shown.
port
Number of the port on the module.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
enable
Enable port negotiation protocol
disable
Disable port negotiation protocol
P330-N# set port negotiation 4/1 disable
Link negotiation protocol disabled on port 4/1.
module/
port
port
Port identifier
admin
status
status
force-true - treat this port as if it is connected point-to-point
force-false - treat this port as if it is connected to shared media
auto - try to automaticaly detect the connection type of the port
force-false - treat this port as if it is connected to shared media
auto - try to automaticaly detect the connection type of the port
P330-N# set port point-to-point admin status 1/1 force-true
port 1/1 point to point admin status is set to force-true