Avaya P330-ML-ML Manual Do Utilizador

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

97

User level: privileged, supervisor.
L This command applies to P333T-PWR switches only and is used by P330-

ML-ML switches to control P333T-PWR modules in the stack.

Use the set port powerinline command to enable or disable the load detection 
process and power delivery for the port.
The syntax for this command is:

set port powerinline

 <module_number/port_number> {[enable] | 

disable}

Example:

User level: privileged, supervisor.
L This command applies to P333T-PWR switches only and is used by P330-

ML-ML switches to control P333T-PWR modules in the stack.

Use the set port power inline priority  command to configure the priority 
level of powering the port. Possible values are Critical, High, and Low. At power on 
all ports are set to Low Priority.
Within each group, the lowest port number has a highest priority, i.e. within the 
ports 1 to 8, port 1 has the highest priority although its priority is lower than port 9 
which belongs to High priority group.
The syntax for this command is:

 <module_number/port_number> 

<priority>

module_
number

Number of the module hosting the port for which load detection is to 
be enabled/disabled.

port_ 
number

Number of the port for which load detection should be 
enabled/disabled.

enable - enables load detection process for port
disable - disables load detection process for port

P330-N# set port powerinline 3/1-3 enable

Load detection process on ports 3/1-3 is enabled

module_number

Number of the module hosting the port for which a 
powerline priority level is to be set.

port_number

Number of the port for which a powerline priority level is 
to be set.