McDATA 8832 Manual Do Utilizador

IBM BladeCenter Deployment Guide 

30  

 

http://w3-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100564

               © 2006 IBM Version 3.0, 3/10/2006 

 

The firmware for HS40 blades MUST be updated to the minimum levels shown in Table 5 HS40 BIOS 
and ISMP Information if the blade is going to be running Linux. There is a problem identified in the 
1.32 version of the BIOS, related to EFI, which causes processors to be disabled. The only fix for this 
error is to upgrade the BIOS and ISMP firmware.  

Installing Red Hat by booting from remote CDs is not currently supported on the HS40. Installing the 

[root@localhost root]# 

[root@localhost root]# 

total 285 
-rwxr-xr-x 1 root root 279887 Jan 6 20:06 basplnx-6.2.1-1.src.i386.rpm 
[root@localhost root]# 
[root@localhost root]# 

[root@localhost root]# 
[root@localhost root]# 

[root@localhost tmp]# 

1:basplnx ########################################### [100%] 
[root@localhost tmp]# 
[root@localhost tmp]# 

[root@localhost redhat]# 
[root@localhost redhat]# 

Execu

ting(%prep): /bin/sh -e /var/tmp/rpm-tmp.4397 

Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.4397 
gcc -DLINUX -D__KERNEL__ -DMODULE -I/lib/modules/2.4.9-
e.24smp/build/include -Wall -Wstrict-prototypes -O2 -c blf.c 
gcc -DLINUX -D__KERNEL__ -DMODULE -I/lib/modules/2.4.9-
e.24smp/build/include -Wall -Wstrict-prototypes -O2 -c pal.c 
ld -r -o basp.o blf.o pal.o blfcore.o 
Execu

ting(%install): /bin/sh -e /var/tmp/rpm-tmp.67022 

Processing files: basplnx-6.2.1-1 
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.67022 
Finding Provides: (using /usr/lib/rpm/find-provides)... 
Finding Requires: (using /usr/lib/rpm/find-requires)... 
PreReq: /bin/sh /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(CompressedFileNames) <= 3.0.4-1 
Requires(interp): /bin/sh /bin/sh /bin/sh 
Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(CompressedFileNames) <= 3.0.4-1 
Requires(post): /bin/sh 
Requires(preun): /bin/sh 
Requires(postun): /bin/sh 
Requires: ld-linux.so.2 libc.so.6 /bin/sh libc.so.6(GLIBC_2.0)
libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) 
Wrote: /usr/src/redhat/RPMS/i386/basplnx-6.2.1-1.i386.rpm 
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3526 
 
[root@localhost redhat]# 

Preparing... ########################################### [100%] 
1:basplnx ########################################### [100%] 
[root@localhost redhat]# 

The BladeCenter Deployment Guide is intended as a personal productivity tool. It is not intended to be comprehensive and is provided for 

guidance only, on an 'as is basis' without warranty of any kind. Please be aware that its contents have not been certified by IBM.