American Power Conversion AP9615 Manual Do Utilizador
6
Installation
procedure,
continued
Matrix-
UPS
™
a Shut down and power off the connected
equipment.
b Turn off the circuit breaker on the bottom left
side on the back panel of the
UPS
.
Symmetra
™
Power Array
™
a Shut down and power off the connected
equipment.
b Turn off the System Enable switch on the
bottom left side on the back panel of the
UPS
.
Smart-UPS
®
DP
a Shut down and power off the connected
equipment.
b Turn off the
ON/OFF
switch on the front
panel.
Triple Chassis for Silcon DP300E Series UPSs
a Shut down and power off the connected equip-
ment.
b If present, unplug the Triple Chassis’s power
supply from the AC power outlet.
c Disconnect the cable attached to the To UPS
port on the Triple Chassis.
2 Unpack the 5 Port 10Base-T Hub. The shipping
materials are recyclable. Please save, reuse, or dis-
pose of them appropriately.
pose of them appropriately.
Handle the 5 Port 10Base-T Hub by the front
panel. Do not touch the exposed printed cir-
cuit board or components. Touching the
circuit board or components may result in
damage to the hub.
panel. Do not touch the exposed printed cir-
cuit board or components. Touching the
circuit board or components may result in
damage to the hub.
Continued on next page