American Power Conversion AP9615 Manual Do Utilizador

8

5 Secure the hub with the screws removed in Step 3.

6 Using straight-through 

UTP

 cables, connect the Sta-

tion ports (

1X–4X

, in any order) to each worksta-

tion’s 

10Base-T 

port or to the Uplink port of a hub to 

7 Connect the Uplink port, if applicable:

• If connecting to another hub: 

– Use a straight-through cable to connect to a Sta-

– Use a crossover cable to connect to the Uplink 

• If connecting the Uplink port to a workstation or 

other non-hub device: 

– Use a crossover cable. (See Figure 2 on page 4.)

8 Turn on the 

UPS

 or device that now houses the hub. 

To turn on the 

UPS

 or device, follow the appropriate 

procedure listed below:

a Plug the 

UPS

 back into the AC

 power outlet

.

b Press and hold the Power On button until you 

hear a click and beep or until the power LED 
illuminates.

c Power on the connected equipment.

a Turn on the circuit breaker on the bottom left 

side on the back panel of the 

UPS

.

b Turn on the UPS via the front panel.

c Power on the connected equipment.