Adtran 1200657L2 Manual Do Utilizador
Chapter 3. Configuration
61200659L1-1
MX2800 STS-1 User Manual
3-41
Update via TFTP Server
Select
U
PDATE
VIA
TFTP
SERVER
from the
U
TILITIES
menu. A new
menu displays, allowing you to enter the IP address and file name
of the file you want to download to the unit. Once this information
is entered, select
of the file you want to download to the unit. Once this information
is entered, select
S
TART
/S
TOP
T
RANSFER
.
Config Transfer
Select
C
ONFIG
T
RANSFER
from the
U
TILITIES
menu to transfer files to
and from a TFTP server. The
C
ONFIG
T
RANSFER
option also lets you
save the MX2800 STS-1 configuration as a backup file, so you can
use the same configuration with multiple MX2800 STS-1 units.
Only one configuration transfer session (upload or download) can
be active at a time.
use the same configuration with multiple MX2800 STS-1 units.
Only one configuration transfer session (upload or download) can
be active at a time.
Saving to a TFTP Server
To save current configuration information to a TFTP server, follow
the steps listed below.
the steps listed below.
1. Set
the
S
ERVER
IP A
DDRESS
field to the IP address of the
machine running the TFTP server program.
If you are using the ADTRAN TFTP server, the IP address
displays in the
displays in the
S
ERVER
IP A
DDRESS
field. For other TFTP
servers, please refer to the appropriate documentation.
2. Change the TFTP Server Filename to a unique filename. This
Before using
C
ONFIG
T
RANSFER
, the MX2800 STS-1 should have a valid
IP address, subnet mask, and default gateway (if required), and should
be connected to an Ethernet network.
be connected to an Ethernet network.