Adtran 1200657L2 Manual Do Utilizador
Chapter 3. Configuration
3-42
MX2800 STS-1 User Manual
61200659L1-1
will be the name of the configuration file saved to the remote
server.
server.
3. Select
S
AVE
C
ONFIG
R
EMOTELY
.
Retrieving from a TFTP Server
To retrieve current configuration information from a TFTP server,
follow the steps listed below.
follow the steps listed below.
1. Set
the
S
ERVER
IP A
DDRESS
field to the IP address of the
machine running the TFTP server program.
If you are using the ADTRAN TFTP server, the IP address
displays in the
displays in the
S
ERVER
IP A
DDRESS
field. For other TFTP
servers, please refer to the program’s appropriate
documentation.
documentation.
2. Change
the
TFTP
S
ERVER
F
ILE
N
AME
to a unique filename.
Include the complete path. This will be the name of the
configuration file retrieved from the remote server.
configuration file retrieved from the remote server.
3. Select
L
OAD
AND
U
SE
C
ONFIG
.
Some TFTP servers constrain the format of the filename depending on
the operating system of the server. For example, a TFTP server
running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period, and three extension characters).
the operating system of the server. For example, a TFTP server
running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period, and three extension characters).
Configuration changes will not be implemented until all Telnet
sessions are closed. Loading a new configuration may disrupt
data traffic.
sessions are closed. Loading a new configuration may disrupt
data traffic.