Adtran ADT-1234POE Manual Do Utilizador

Página de 76
 Option Modules
NetVanta 1000/1000R Series Hardware Installation Guide
 42
Copyright © 2008 ADTRAN, Inc.
61200500L1-34N
NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1)
The NetVanta E1/FE1 + G.703 Drop NIM (see Figure 29) provides a single WAN-E1 interface (2.043 Mbps) 
with user-selectable TS0 assignment, and a G.703 drop port that may be used to drop and insert traffic to an E1 
PBX. See Table A-7 on page 69 for the WAN-E1 pinouts. See Table A-9 on page 70 for the G.703 pinouts. See 
page 73 for the DBU connector pinouts. An optional DIM is required for dial backup applications.
Figure 29.  NetVanta E1/FE1 + G.703 Drop NIM
WAN-E1
G.703
DBU
Features and Specifications
Operating Modes
Frame Relay, Multilink Frame Relay
PPP, Multilink PPP
HDLC
WAN-E1 Interface
Supported Standards: ITU G.703, 
ITU-T G.704 (CRC-4), ITU-T G.823, 
ITU-T G.797
Line Rate: 2.048 Mbps +50 PPM
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
FE1 Line Rate: Channelized timeslot (in 
multiples of 64 kbps)
Receiver Sensitivity: -30 dB
Connector: RJ-48C
G.703 Interface
Receiver Sensitivity: -30 dB
Line Rate: 2.048 Mbps +50 PPM
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
Capacity: 1 to 31 timeslots
Connector: RJ-48C
Clock Source
Network
Internal 
Through
Diagnostics
Test Pattern Generation and Detection: 
QRSS, 511, all ones, all zeros
Network loopbacks
Network performance data (15 minutes 
and 24 hours)
Alarm generation and detection
Compliance
AS/ACIF S016
ETSI TBR 12/TBR 13
EN 60950
IEC 60950
AS/NZS 60950
RoHS Compliant (Telecommunications 
exemption)
Environmental 
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, 
noncondensing
Physical 
Dimensions: 2.75-inch W x 4.25-inch D