Adtran ADT-1234POE Manual Do Utilizador
NetVanta 1000/1000R Series Hardware Installation Guide
Option Modules
61200500L1-34N
Copyright © 2008 ADTRAN, Inc.
43
NetVanta Serial NIM (P/N 1200866E1)
The NetVanta Serial NIM (shown in Figure 30) can be configured by the user as a V.35, X.21 (V.11), or EIA 530
interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN
P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required
(refer to Caution, below). See Table A-12 on page 71 for the serial connector pinouts, and page 73 for the DBU
connector pinouts. An optional DIM is required for dial backup applications.
interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN
P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required
(refer to Caution, below). See Table A-12 on page 71 for the serial connector pinouts, and page 73 for the DBU
connector pinouts. An optional DIM is required for dial backup applications.
Figure 30. NetVanta Serial NIM
Cable length for the Serial NIM should not exceed 25 feet.
SERIAL
DBU
Features and Specifications
Operating Mode
•
DTE only
Serial Interface
•
Supported Standards: ISO 4903 (X.21),
CCITT V.35 Synchronous (V.35),
EIA 530 Synchronous
CCITT V.35 Synchronous (V.35),
EIA 530 Synchronous
•
Provides V.35, X.21 (V.11), or EIA 530
electrical interface
electrical interface
•
Connector: 26-pin smart serial (DTE)
Compliance
•
•
ETSI TBR1
•
ETSI TBR2
•
EN 60950
•
IEC 60950
•
UL/CUL 60950
•
AS/NZS 60950
•
RoHS Compliant (Telecommunications
exemption)
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D