Planon System Solutions DocuPort Series DocuPen Manual Do Utilizador

LED Indicators

The 4 LED indicators at the top of the DocuPen™ from left to right indicate the following:

LED LIGHTS

Condition

LED #1

Processor On/Off and Scan Speed Too

Fast

When you press the DocuPen™ power
button, this red light turns on, & also the #2, &
#3 LED indicating that the DocuPen™ is
ready for use.

This light also flashes if your scan speed

is too fast.

LED's #2 & #3

ALL 3 LED'S ON
READY TO SCAN
STANDARD MODE

Available Memory Capacity

The state of the second and third lights

indicate the Memory capacity available for
scanning during power up:

•

Both lights on

= more than 50% total

memory capacity available.

•

1 light on

= 25% to 50% total capacity

available.

•

No lights on

= less than 25% total capacity

available.

•

Lights flash after scanning

= no capacity

available. You must download images.

LED #4

ALL 4 LED'S ON
READY TO SCAN
HI-RES MODE

Scan Resolution

By default, the DocuPen™ ’s scan resolution

is 100 dpi.

When you press the power button two times,

this light turns on, indicating that the
resolution is set at 200 dpi (Hi resolution
mode).

SEE ALSO: Blinking LEDs also indicate error conditions.
The error conditions and their meanings are discussed on page 38.

DocuPen™ Operation Manual