Planon System Solutions DocuPort Series DocuPen Manual Do Utilizador
Getting Started
Inserting the Batteries
The factory has left the cover in position but not locked in place, to allow easier battery loading. Therefore simply push forward &
lift up at the narrow end.
The DocuPen™ uses 4 (four) 1.55v silver oxide high drain coin cell batteries included in the package.
The recommended battery is Energizer 389VP (SR1130W).
1. To remove the battery compartment cover and insert the batteries:
lift up at the narrow end.
The DocuPen™ uses 4 (four) 1.55v silver oxide high drain coin cell batteries included in the package.
The recommended battery is Energizer 389VP (SR1130W).
1. To remove the battery compartment cover and insert the batteries:
Looking at the top of the DocuPen™, push down firmly on the cover with
thumb at the back and slide toward the front of the unit. At the same time lift
up at the front of the cover with index finger while pushing forward.
2. Insert the new batteries correctly as illustrated below.
IMPORTANT:
You must install the batteries correctly according to the polarity markings in the battery compartment.
Same type polarity markings must touch.
For example, in a “+” marked compartment, insert the battery “+” side down.
For example, in a “+” marked compartment, insert the battery “+” side down.
DocuPen™ Operation Manual
8