Canon Model 6401 B Manual Do Utilizador
Field Test Unit Software
compatibles). If you require to use PDLIO you must purchase that
package
package
separately.
g)
copy data files and command files between cassette, RAM and the
RS-232 communication channel (host computer).
h)
save frequently used (Un)load/Plot
operator responses into com-
mand files in RAM or on cassette.
3.2 COMMAND FILES
Once the format of the (un)load or print/plot output has been decided, the
operator commands (entered into the keyboard in response to the questions
listed below) may be saved in a RAM file or on cassette.
operator commands (entered into the keyboard in response to the questions
listed below) may be saved in a RAM file or on cassette.
This feature saves the operator entering all the responses every time a plot
or unload is performed. Instead, the operator simply enters in the command
file name and the (un)load or print/plot proceeds automatically using the
pre-saved operator commands from that command file.
or unload is performed. Instead, the operator simply enters in the command
file name and the (un)load or print/plot proceeds automatically using the
pre-saved operator commands from that command file.
Many command files may be created and saved, allowing command files for
a variety of loading, unloading, printing or plotting operations.
a variety of loading, unloading, printing or plotting operations.
3.3 COPY(ING) FILES
The “COPY” program allows data files or command files to be transferred
to/from RAM/cassette or to/from FTU and a host computer. These files
must be standard BASIC files in ASCII format (lines terminated with a car-
riage return and less than 255 characters in length).
must be standard BASIC files in ASCII format (lines terminated with a car-
riage return and less than 255 characters in length).
3.3.1 Running COPY
1. Connect datacassette and/or RS-232 link to FTU
2. Type:- RUN “COPY” then press Return
3. Answer the following questions:
Section 3. (UN)LOAD, PLOT & COPY
9