Canon Model 6401 B Manual Do Utilizador
Field Test Unit Software
3.3.2 COPY - Operator Responses
Question
Cassette or Ram file
INPUT file or Xfr
(RS-232)?
Answer
C = Cassette file
R = RAM file
X = RS-232 communication channel to a
host computer.
R = RAM file
X = RS-232 communication channel to a
host computer.
Enter Input file
Name of Input file,extension
name, type
(default ,D)
The above two questions are repeated for the OUTPUT file.
Baud Rate?
You have selected Xfr mode. Maximum
Baud rate is 8000. (use 8000/4800/2400/
1200/300)
Note: if cassette selected Baud
Rate is not asked for.
3.3.3 Timing considerations
When copying a file from a host computer (via the RS-232 communications
channel) to a RAM file in the FTU, a delay of two (2) seconds must be
channel) to a RAM file in the FTU, a delay of two (2) seconds must be
provided by the host computer after sending each line before the next line
of the fiIe is sent to the FTU. This delay must be increased to thirty (30)
seconds per line when the FTU is storing the file on a data cassette.
of the fiIe is sent to the FTU. This delay must be increased to thirty (30)
seconds per line when the FTU is storing the file on a data cassette.
NOTE: The transfer to/from a host computer is terminated by the last line
containing the termination word END followed by a carriage return.
(i.e.“END” then press Return)
containing the termination word END followed by a carriage return.
(i.e.“END” then press Return)
3.4 (UN)LOADING TO CASSETTE/RAM
Either program “PLOT” or program “LOAD” may be used to unload data
from a Data Logger.
from a Data Logger.
“PLOT” contains all the features of “LOAD” but “PLOT” (un)loading is
slower and requires a larger amount of RAM (memory).
10
Section 3. (UN)LOAD, PLOT& COPY