ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

318 

Chapter 33 Firmware and Configuration File Maintenance

to read about configurations that disallow TFTP and FTP 

over WAN.

This section shows you how to restore a previously saved configuration. Note that this 
function erases the current configuration before restoring a previous back up configuration; 
please do not attempt to restore unless you have a backup configuration file stored on disk. 

FTP is the preferred method for restoring your current computer configuration to your Prestige 
since FTP is faster. Please note that you must wait for the system to automatically restart after 
the file transfer is complete.

Note: Do not interrupt the file transfer process as this may PERMANENTLY 

DAMAGE YOUR Prestige. 

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file 
upload in this chapter.

Table 108   General Commands for GUI-based TFTP Clients 

Host

Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address 

when shipped.

Send/Fetch

Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your 

computer. 

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom 

extension) on your computer.

Remote File This is the filename on the Prestige. The filename for the firmware is “ras” and for the 

configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.