ZyXEL ADSL Prestige 2602R-61 VoIP 91-006-024004B Manual Do Utilizador

Prestige 2602R Series User’s Guide

320 

Chapter 33 Firmware and Configuration File Maintenance

This section shows you how to upload firmware and configuration files. You can upload 
configuration files by following the procedure in 

 or by following the 

instructions in Menu 24.7.2 – System Maintenance – Upload System Configuration File.

Note: Do not interrupt the file transfer process as this may PERMANENTLY 

DAMAGE YOUR Prestige. 

FTP is the preferred method for uploading the firmware and configuration. To use this feature, 
your computer must have an FTP client. 

When you telnet into the Prestige, you will see the following screens for uploading firmware 
and the configuration file using FTP.

Figure 198   Telnet Into Menu 24.7.1 Upload System Firmware 

You see the following screen when you telnet into menu 24.7.2.

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:
  1. Launch the FTP client on your workstation.
  2. Type "open" and the IP address of your system. Then type "root" and
     SMT password as requested.
  3. Type "put firmware filename ras" where "firmwarefilename" is the name
     of your firmware upgrade file on your workstation and "ras" is the
     remote file name on the system.
  4. The system reboots automatically after a successful firmware upload.

For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.

Press ENTER to Exit: